When first connected to power supply, the display will show all day numbers flashing, the time at 00:00, timed 
function, and OFF output.
Setting the Time
Set current day and time by depressing and holding down button, press DAY button to enter day and the h+ and m+ buttons to enter the time… h+ and m+ will move rapidly if buttons held down. (wait for colon to flash to show time is set).
Different day combinations can be obtained by repeatedly pushing day button. Up to eight ON/OFF periods can be selected for each day.
To Set ‘ON’ Time
Press and release CH1 button. Press the day button to select the DAY, then the hour and minute buttons to select the time you require the birdscarer to switch on. The 7 days can be set at once by pressing day key until all days show along top.
To Set ‘OFF’ Time
Press and release CH1 button. Press the day button to select the DAY, then the hour and minute buttons to select the time you require the birdscarer to switch off.
The 
button is the override control.
Important
Once you have finished setting your program times push clock button to return to actual time.
Turn the birdscarer on. If the green LED is on and it shouldn’t be (i.e. it is not your programmed ON time) press the override button once to show AUTO OFF. If screen shows anything else (i.e. Fixed On or Fixed Off) continue pressing override button until AUTO OFF shows).
+ 1h changes all settings by 1 hour for daylight saving.
Reset cancels all programmes.