1. Clear all timer settings with the cancel button (c) before starting programming.
2. To set the current time, press 
and hold, press D+ for the day, H+ for the hour and M+ for minutes.
3. If you wish to have the same on/off times for every day of the week, you only require one setting.
- Press P and release
- Push the day button until all the 7 days of the week are showing along the top.
(displays 1 ON) - Set the ON time press H+ /M+ for the ON time required, remembering it is a 24 hour
clock. - Press P again (displays 1 OFF)
- Set the OFF time- press H+/M+ for the OFF time required, remembering it is a 24
hour clock. - Press to return to the time of the day. Setting complete.
4. However, if you do require the programming to start immediately, see below:
If the clock time (actual time) is between your start and stop times (e.g. your start time is at 6am and stop time is 6pm and you are setting your programme any time between these times) you will need to switch from AUTO to ON briefly to start the programme working, then switch back to AUTO. The programme is now in sequence.
5. You can have up to 16 ON and OFF times during a 24 hour period.
6. If you wish to have ON/OFF times on specific days rather than for the whole week
- Press P and release
- Push the day button and select the day or days of the week required showing along the top. (displays 1 ON)
- Set the ON time press H+ /M+ for the ON time required, remembering it is a 24 hour clock.
- Press P again (displays 1 OFF)
- Set the OFF time- press H+/M+ for the OFF time required, remembering it is a 24 hour clock.
- Repeat timer ON/OFF settings for any additional day or days
- Press O to return to the time of the day. Setting complete.
7. The cancel button (c) requires a pen or something similar to clear all settings